How is the ACE Integrated Stormwater Management Program involved potential development?

The Stormwater Manager is typically involved early in the process.  Under the presumption that regulatory requirements will be met during the project, several basic requirements will be provided.

a.    The Stormwater Manager will typically provide general information during a typical pre-Technical Review Committee meeting.  This meeting is extremely important and defines expectations and processes through construction and final walk through and closeout of the project with the State of North Carolina.

b.    The Stormwater Manager indicates that his role is more substantial during construction and at the end of construction in which development phases are more clearly defined based on information being prepared by the developer and/or engineer.

c.    The Stormwater Manager encourages on-site meetings and site visits all through the phasing of the project.  However, a minimum of one project site visit is required before a yellow copy of the Certificate of Plan Approval is provided to begin construction.

Show All Answers

1. What does the acronym “ACE” stand for?
2. How is the ACE Integrated Stormwater Management Program involved potential development?
3. During the initial stages, the developer will acknowledge and submit basic information for use in creating the project file.
4. How are the digital files provided by the developer/engineer used?
5. Why is the name of the project so specific?
6. What are common errors in the preparation of the Financial Responsibility/Ownership Form?
7. What are common errors on the Stormwater Agreement?
8. When do I get a yellow copy of the Certificate of Approval?
9. How often should See Click Fix be used for the project?
10. What is required for the issuance of a Certificate of Occupancy provided by Randolph County?
11. What is the purpose of the asset tabular table on phase construction drawings?
12. How are the permit Operation & Maintenance Plan(s) of the ACE Integrated Stormwater Management Plan affected by mandated revisions from NC State & the Environmental Protection Agency initiatives?
13. How is the current edition of AutoCAD submissions used by the City of Archdale?
14. Does the City of Archdale have a proprietary set of drawings for castings?
15. What typically happens when an unsealed AutoCad digital record drawing and AutoCad hard copy record drawing is submitted?
16. How can a contractor remove an erosion control fence during construction?
17. How does the "effectiveness of measure" relate to "making an effort?"
18. How do contractors' typically address sediment transport internal to a project site?